Daily Read / Electricity and circuits
Electricity and circuits · Use a labelled diagram together with the text to explain that current flows only around a complete loop (a closed circuit), that a break anywhere makes an open circuit, and to predict whether a bulb will light and why, including which materials are conductors or insulators
How Does a Simple Circuit Work? Battery, Wire, Bulb, Loop
A flashlight bulb lights only when a loop is complete. Use a labelled diagram to compare a closed and an open circuit and predict which materials let current flow.
Device/browser voice. Pronunciation and availability vary.
A flashlight that will not light
Slide the switch on a flashlight and the bulb glows. Slide it off and the light goes out. Nothing is used up or broken when you do this, so what changes? The answer is hidden in a loop that you cannot see from the outside.
Science Buddies, a science-education website, builds a flashlight activity from four simple parts: a battery, a bulb, some wires and an on/off switch. It explains that electricity in wires is mostly electrons moving through the metal. This movement of electrons is called current. Together the joined parts are a circuit, which is a path for current.[1]
Why the loop has to be complete
Science Buddies says that current can flow only when the path is a complete loop. A complete loop is called a closed circuit. If the loop is broken anywhere, it is an open circuit, and no current flows at all.
A battery has two ends, one positive and one negative. Science Buddies compares this with a wall outlet, which has two prongs. In both cases the two ends must be part of the same complete loop for current to flow. Look at the left side of the diagram and follow the loop with your finger: battery, wire, bulb, wire, switch, wire, and back to the battery. Nothing interrupts it, so the bulb lights.[1]
Open and closed: compare the two circuits
Now look at the right side of the diagram. It has the same battery, the same bulb and the same wires. The only difference is that the switch is up. That leaves a gap in the loop, so the circuit is open and the bulb stays dark. This comparison is our own reading of the diagram, but it matches what Science Buddies says about open and closed circuits.
Science Buddies describes a test with the flashlight circuit. When one wire is disconnected from the battery, the circuit is open and the bulb turns off. When the wire is reconnected, the circuit is closed and the bulb lights again. A break in a wire has the same effect as an open switch. One way to put it in our own words is that a switch is a gap you can open and close on purpose.[1]
Conductors and insulators
Not every material lets current flow. Science Buddies says that metals are generally good conductors, which means they let current flow easily. Most non-metals, such as plastic, wood and rubber, are insulators, which means current does not flow through them easily. The word generally matters, because there are exceptions and mixtures.
The same website uses a third wire as a tester. Touch one end of the circuit to the other end through an object. If the object is a conductor, it completes the loop and the bulb lights. If it is an insulator, the circuit stays open and the bulb stays off. Here is an observation of our own: the wires in a cord are metal inside and plastic outside. The metal carries the current, and the plastic covering helps keep it where it belongs.[1]
Safety and small details
Science Buddies warns that electricity from wall outlets is very dangerous. It also says never to cut into a wire or open an electronic device while it is plugged into a wall outlet. The activity it describes uses a battery and has an adult handle the tools that strip wire and take the flashlight apart.
We add a rule of our own for home learning: only use a small battery, with an adult nearby, and never experiment with a wall outlet. One more detail from the same source is that an LED, a kind of small light, only lights when it is connected the right way around. If a circuit looks complete but an LED stays dark, turning it around is a good thing to try.[1]
Fast lesson
Use these checks before you answer the practice questions.
Ask your child to follow the loop in the diagram from the battery, through the bulb, the switch and back. Then ask where the gap is in the second picture.
With the batteries in and nothing plugged into the wall, slide the switch and watch the bulb. Then, with an adult, look at where the batteries touch the metal parts. The idea of a complete loop is easier to remember when it is seen.
Encourage your child to say that metals are generally conductors. The source uses that careful word, and it leaves room for tests.
The lesson uses small batteries only. Never let a child experiment with wall outlets, even to test a prediction.
Common mistakes
Why this fails: Current needs a complete loop that includes both ends of the battery.
Why this fails: An open switch makes a gap in the loop, so current does not flow; nothing is used up by the gap.
Why this fails: Metals are generally conductors, but plastic, wood and rubber are generally insulators.
Word Lab
Use the meaning, hear the word, then try it in your own sentence.
circuit
nouna path that current can follow
A flashlight has a simple circuit.
current
nounthe flow of electrons through a material such as a wire
Current flows around a closed circuit.
electron
nouna tiny particle that moves through metal wires as current
Electrons move through the metal wire.
battery
nouna device with a positive end and a negative end that pushes current around a circuit
The battery has two ends.
bulb
nounthe part of a flashlight that gives light when current flows
The bulb lights when the loop is complete.
switch
nouna part that opens or closes a gap in a circuit
Slide the switch to turn on the flashlight.
closed circuit
noun phrasea complete loop that current can flow around
A closed circuit lights the bulb.
open circuit
noun phrasea loop with a break in it, so no current flows
An open circuit keeps the bulb dark.
conductor
nouna material that lets current flow easily
Metal is generally a good conductor.
insulator
nouna material that does not let current flow easily
Rubber is an insulator.
complete
adjectivehaving every part, with nothing missing
The loop must be complete.
gap
nounan empty space where something is missing
An open switch leaves a gap in the loop.
Check your understanding
Choose an answer, explain your choice, and then check. Hints and retries are welcome.
Try the questions here. Public practice does not save a learning record.
Support · Find it in the text
Support · Find it in the text practice
Each answer is stated in the article. Point to the sentence.
1. What is the flow of electrons through metal wires called?
2. Which four parts make up the flashlight circuit in the Science Buddies activity?
3. What is a closed circuit?
4. What is an open circuit?
5. Which materials are generally good conductors?
6. What does Science Buddies warn about wall outlets?
Apply · Cause and effect
Apply · Cause and effect practice
Use because or so to connect a cause with its effect.
7. Finish the sentence: The bulb goes dark when a wire is disconnected, because …
8. Finish the sentence: The bulb lights when the switch is closed, so …
9. Using the diagram, explain the difference between the two circuits.
10. Why does a plastic object not light the bulb in the tester?
11. Why does a battery need both of its ends in the loop?
12. In your own words, why might a wire be metal inside and plastic outside?
Reason · Predict and test
Reason · Predict and test practice
Use what you learned to reason about new situations.
13. A flashlight will not light. Name two things you could check.
14. Why is a switch a useful kind of break?
15. An LED stays dark even though the loop looks complete. What could you try?
16. A tester touches aluminium foil. What do you expect, and why?
17. Why should you never test materials by using a wall outlet?
Practice answer key
- 1. Current.
See 'A flashlight that will not light'. - 2. A battery, a bulb, wires and an on/off switch.
See 'A flashlight that will not light'. - 3. A complete loop that current can flow around.
See 'Why the loop has to be complete'. - 4. A loop that is broken somewhere, so no current flows.
See 'Why the loop has to be complete'. - 5. Metals.
See 'Conductors and insulators'. - 6. Electricity from wall outlets is very dangerous, and you should never cut into a wire or open a device while it is plugged in.
See 'Safety and small details'. - 7. … the loop is broken, so current cannot flow.
A break makes an open circuit. - 8. … the loop is complete and current flows.
A closed switch closes the loop. - 9. They have the same parts, but the switch on the left is closed and the loop is complete, while the switch on the right is open and leaves a gap.
The only difference is the gap. - 10. Plastic is an insulator, so it does not complete the loop.
See 'Conductors and insulators'. - 11. Current needs a complete loop that includes the positive and the negative end.
Science Buddies compares this with the two prongs of an outlet. - 12. The metal is a conductor that carries the current, and the plastic is an insulator that helps keep it in the wire.
This is our own observation, not a claim from the source. - 13. Any two of: a loose wire, a gap where parts do not touch, a switch that is off, or an LED turned the wrong way around.
These are our own ideas based on the open circuit idea. - 14. You can open and close the gap on purpose, so you can turn the light on and off.
This is our own way to describe the switch. - 15. Turn the LED around, because it only lights when connected the right way around.
Science Buddies mentions this about LEDs. - 16. The bulb should light, because metals are generally conductors.
The word generally leaves room for exceptions, so test it. - 17. Wall-outlet electricity is very dangerous, so tests use only small batteries with an adult.
See 'Safety and small details'.
Related skills
Put it in your own words
This draft is not saved when you leave or refresh the page.
Check your own explanation
This is self-review, not automatic marking.
Compare with a model response
A simple circuit has a battery, wires, a bulb and a switch joined in a loop. Current flows only when the loop is complete, so a closed circuit lights the bulb. If a wire is loose or the switch is open, the circuit is open, and as a result no current flows and the bulb stays dark. Metals are generally conductors, so they can complete the loop, but plastic, wood and rubber are insulators, because they do not let current flow easily. For safety, I only use a small battery with an adult and I never experiment with a wall outlet.
Sources and revision notes
Source check: 2026-11-15. Grade guidance is an editorial suggestion, not a standardised reading score.
What changed in this edition?
The statements that electricity in wires is mostly electrons moving through metal and called current, that a complete loop is a closed circuit and a break makes an open circuit, that a battery's two ends and an outlet's two prongs must both be in a complete loop, the flashlight parts, the disconnected-wire test, the tester wire, the examples of conductors and insulators, the LED detail and the safety warnings come from Science Buddies, which was opened on 2026-11-15. The comparison of the two circuits in the diagram, the idea of a switch as a gap you open and close, the observation about metal and plastic in cords, the battery-only rule for home learning, the invented object tests and the checks in the practice questions are original illustrations or reasoning. Only one source was opened for this lesson, so check surprising claims with a teacher or another reliable source. Report errors through Sources and corrections.